plastic injection company | Sertsem

Street lighting boxes


A watertight protection and junction box for street lighting, with the casing made of self-extinguishing polycarbonate 960º, grey Ral7035 colour.

Electrical protection is provided by 10×38 type T-0 cylindrical fuse cartridges.

Inside, a terminal strip has been designed to house four open input and output terminals, all of which accept two cables of up to 25 mm2.

There are two terminals for the junction or output to the light, admitting maximum cable size of 6 mm2 each.

The terminals have received an anti-corrosion treatment, allowing both copper and aluminium cables to be connected.

This box is specially designed for the AM-10 type post/column, although its size allows it to be used in any other type. They can also be installed outdoors, and depending on placement, the use of one or another accessory (AC002 or AC001) is recommended.

Degree of protection: IP 44 with AC001, IP 13 with AC002, IK08, Double Insulation, CE Marking.


ModelosNúmero/de/PolosAdmisión Max. Bornes
Bornes DerivaciónBornes AuxiliaresCantidad Embalaje
CF-100/M3P + N2 X 25 mm²2 x 6 mm²050


  • Enclosing Material: Polycarbonate
  • Dimensions: 135 x 98 x 56 mm.
  • Protection Type: Fuse holder for 10×38 T-0 cylindrical cartridges
  • Protection Degree: IP44 with AC001 – IP13 with AC002 according to EN 60529, IK08 UNE-EN 50102:1996+A1:1999+corr:2002+A1CORR:2002
  • Insulation: Measurement of creepage lines and distances in air UNE 20098-75
  • Safety: Dielectric Rigidity UNE 21095-73
  • Installation: The connection is made outside the staff/column, it can also be installed on facades and posts.  Connection/disconnection of fuses through front pressure/extraction cover.
  • Certification: Certificates obtained by organizations approved by ENAC.
  • Quality: ISO 9001:2008 STANDARD
Scroll to Top